We present a new module of the micrOMEGAs package for the calculation of WIMP-nuclei elastic scattering cross sections relevant for the direct detection of dark matter through its interaction with nuclei in a large detector. With this new module, the computation of the direct detection rate is performed automatically for a generic model of new physics which contains a WIMP candidate. This model needs to be implemented within micrOMEGAs2.1.

This paper will discuss the design and construction of BESIII, which is designed to study physics in the tau-charm energy region utilizing the new high luminosity BEPCII double ring e+e- collider. The expected performance will be given based on Monte Carlo simulations and results of cosmic ray and beam tests. In BESIII, tracking and momentum measurements for charged particles are made by a cylindrical multilayer drift chamber in a 1 T superconducting solenoid. Charged particles are identified with a time-of-flight system based on plastic scintillators in conjunction with dE/dx (energy loss per unit pathlength) measurements in the drift chamber. Energies of electromagnetic showers are measured by a CsI(Tl) crystal calorimeter located inside the solenoid magnet. Muons are identified by arrays of resistive plate chambers in the steel magnetic flux return. The level 1 trigger system, Data Acquisition system and the event filter system based on networked computers will also be described.

NEXT-100 is an electroluminescent high-pressure xenon gas time projection chamber that will search for the neutrinoless double beta ($\beta \beta 0 \nu$) decay of Xe-136. The detector possesses two features of great value for $\beta \beta 0 \nu$searches: energy resolution better than 1\% FWHM at the$Q$ value of Xe-136 and track reconstruction for the discrimination of signal and background events. This combination results in excellent sensitivity, as discussed in this paper. Material-screening measurements and a detailed Monte Carlo detector simulation predict a background rate for NEXT-100 of at most $4\times10^{-4}$ counts keV$^{-1}$ kg$^{-1}$ yr$^{-1}$. Accordingly, the detector will reach a sensitivity to the \bbonu-decay half-life of $2.8\times10^{25}$ years (90\% CL) for an exposure of 100 $\mathrm{kg}\cdot\mathrm{year}$, or $6.0\times10^{25}$ years after a run of 3 effective years.

We investigate the potential of using deep learning techniques to reject background events in searches for neutrinoless double beta decay with high pressure xenon time projection chambers capable of detailed track reconstruction. The differences in the topological signatures of background and signal events can be learned by deep neural networks via training over many thousands of events. These networks can then be used to classify further events as signal or background, providing an additional background rejection factor at an acceptable loss of efficiency. The networks trained in this study performed better than previous methods developed based on the use of the same topological signatures by a factor of 1.2 to 1.6, and there is potential for further improvement.

The design of fast reactors burning MOX fuels requires accurate capture and fission cross sections. For the particular case of neutron capture on 242Pu, the NEA recommends that an accuracy of 8-12% should be achieved in the fast energy region (2 keV-500 keV) compared to their estimation of 35% for the current uncertainty. Integral irradiation experiments suggest that the evaluated cross section of the JEFF-3.1 library overestimates the 242Pu(n,{\gamma}) cross section by 14% in the range between 1 keV and 1 MeV. In addition, the last measurement at LANSCE reported a systematic reduction of 20-30% in the 1-40 keV range relative to the evaluated libraries and previous data sets. In the present work this cross section has been determined up to 600 keV in order to solve the mentioned discrepancies. A 242Pu target of 95(4) mg enriched to 99.959% was irradiated at the n TOF-EAR1 facility at CERN. The capture cross section of 242Pu has been obtained between 1 and 600 keV with a systematic uncertainty (dominated by background subtraction) between 8 and 12%, reducing the current uncertainties of 35% and achieving the accuracy requested by the NEA in a large energy range. The shape of the cross section has been analyzed in terms of average resonance parameters using the FITACS code as implemented in SAMMY, yielding results compatible with our recent analysis of the resolved resonance region.The results are in good agreement with the data of Wisshak and K\"appeler and on average 10-14% below JEFF-3.2 from 1 to 250 keV, which helps to achieve consistency between integral experiments and cross section data. At higher energies our results show a reasonable agreement within uncertainties with both ENDF/B-VII.1 and JEFF-3.2. Our results indicate that the last experiment from DANCE underestimates the capture cross section of 242Pu by as much as 40% above a few keV.

Bremsstrahlung fluxes for irradiating tantalum samples were formed by irradiating a tungsten converter with an electron beam with energy up to 130 MeV. The relative yields and flux-averaged cross-sections of multinucleon photonuclear reactions with the emission of up to 9 neutrons in 181Ta nuclei were determined. Monte Carlo simulations to study the yields of photonuclear reactions were performed using Geant4 and TALYS-2.0 codes. The obtained experimental results were compared with the available literature data and calculated results. The comparison showed that the values of the relative reaction yield and the flux-averaged cross-section coincide with the literature data, taking into account the different geometry of the experiments. The calculated results coincide with the experimental ones only for reactions with the emission of up to 5 neutrons from the nucleus.

HERAFitter is an open-source package that provides a framework for the determination of the parton distribution functions (PDFs) of the proton and for many different kinds of analyses in Quantum Chromodynamics (QCD). It encodes results from a wide range of experimental measurements in lepton-proton deep inelastic scattering and proton-proton (proton-antiproton) collisions at hadron colliders. These are complemented with a variety of theoretical options for calculating PDF-dependent cross section predictions corresponding to the measurements. The framework covers a large number of the existing methods and schemes used for PDF determination. The data and theoretical predictions are brought together through numerous methodological options for carrying out PDF fits and plotting tools to help visualise the results. While primarily based on the approach of collinear factorisation, HERAFitter also provides facilities for fits of dipole models and transverse-momentum dependent PDFs. The package can be used to study the impact of new precise measurements from hadron colliders. This paper describes the general structure of HERAFitter and its wide choice of options.

Sets of parton distribution functions (PDFs) of the proton are reported for the leading (LO), next-to-leading (NLO) and next-to-next-to leading order (NNLO) QCD calculations. The parton distribution functions are determined with the HERAFitter program using the data from the HERA experiments and preserving correlations between uncertainties for the LO, NLO and NNLO PDF sets. The sets are used to study cross-section ratios and their uncertainties when calculated at different orders in QCD. A reduction of the overall theoretical uncertainty is observed if correlations between the PDF sets are taken into account for the ratio of $WW$ di-boson to $Z$ boson production cross sections at the LHC.

The cross sections of 110 radioactive nuclide with mass numbers 22 < A < 198 amu from the interaction of 2.2 GeV/nucleon deuterons from the Nuclotron of the Laboratory of High Energies (LHE), Joint Institute for Nuclear Research (JINR) at Dubna with a 197Au target are investigated using induced activity method. The results including charge and mass distributions are parameterized in terms of 3-parameter equation in order to complete the real isobaric distribution. Using data from charge distribution total mass-yield distribution was obtained. The analysis of the mass-yield distribution allows to suppose existence of different channels of the interaction such as spallation, deep spallation, fission-like and multifragmentation processes.

The NEXT experiment aims to observe the neutrinoless double beta decay of $^{136}$Xe in a high pressure gas TPC using electroluminescence (EL) to amplify the signal from ionization. Understanding the response of the detector is imperative in achieving a consistent and well understood energy measurement. The abundance of xenon k-shell x-ray emission during data taking has been identified as a multitool for the characterisation of the fundamental parameters of the gas as well as the equalisation of the response of the detector. The NEXT-DEMO prototype is a ~1.5 kg volume TPC filled with natural xenon. It employs an array of 19 PMTs as an energy plane and of 256 SiPMs as a tracking plane with the TPC light tube and SiPM surfaces being coated with tetraphenyl butadiene (TPB) which acts as a wavelength shifter for the VUV scintillation light produced by xenon. This paper presents the measurement of the properties of the drift of electrons in the TPC, the effects of the EL production region, and the extraction of position dependent correction constants using K$_{\alpha}$ X-ray deposits. These constants were used to equalise the response of the detector to deposits left by gammas from $^{22}$Na.

The KM3NeT neutrino telescope is currently being deployed at two different sites in the Mediterranean Sea. First searches for astrophysical neutrinos have been performed using data taken with the partial detector configuration already in operation. The paper presents the results of two independent searches for neutrinos from compact binary mergers detected during the third observing run of the LIGO and Virgo gravitational wave interferometers. The first search looks for a global increase in the detector counting rates that could be associated with inverse beta decay events generated by MeV-scale electron anti-neutrinos. The second one focuses on upgoing track-like events mainly induced by muon (anti-)neutrinos in the GeV--TeV energy range. Both searches yield no significant excess for the sources in the gravitational wave catalogs. For each source, upper limits on the neutrino flux and on the total energy emitted in neutrinos in the respective energy ranges have been set. Stacking analyses of binary black hole mergers and neutron star-black hole mergers have also been performed to constrain the characteristic neutrino emission from these categories.

Gas detector are very light instrument used in high energy physics to measure the particle properties: position and momentum. Through high electric field is possible to use the Gas Electron Multiplier (GEM) technology to detect the particles and to exploit the its properties to construct a large area detector, such as the new IT for BESIII. The state of the art in the GEM production allow to create very large area GEM foils (up to 50x100 cm2) and thanks to the small thickness of these foil is it possible to shape it to the desired form: a Cylindrical Gas Electron Multiplier (CGEM) is then proposed. The innovative construction technique based on Rohacell, a PMI foam, will give solidity to cathode and anode with a very low impact on material budget. The entire detector is sustained by permaglass rings glued at the edges. These rings are use to assembly the CGEM together with a dedicated Vertical Insertion System and moreover there is placed the On-Detector electronic. The anode has been improved w.r.t. the state of the art through a jagged readout that minimize the inter-strip capacitance. The mechanical challenge of this detector requires a precision of the entire geometry within few hundreds of microns in the whole area. In this presentation will be presented an overview of the construction technique and the validation of this technique through the realization of a CGEM and its first tests. These activities are performed within the framework of the BESIIICGEM Project (645664), funded by the European Commission in the action H2020-RISE-MSCA-2014.

We present the latest version of micromegas, a code that calculates the relic density of the lightest supersymmetric particle in the MSSM. All tree-level processes for the annihilation of the LSP are included as well as all possible coannihilation processes with neutralinos, charginos, sleptons, squarks and gluinos. The cross-sections extracted from CalcHEP are calculated exactly using loop-corrected masses and mixings as specified in the SUSY Les Houches Accord. Relativistic formulae for the thermal average are used and care is taken to handle poles and thresholds by adopting specific integration routines. The input parameters can be either the soft SUSY parameters in a general MSSM or the parameters of a SUGRA model specified at some high scale (GUT). In the latter case, a link with Suspect, Softsusy, Spheno and Isajet allows to calculate the supersymmetric spectrum, Higgs masses, as well as mixing matrices. Higher-order corrections to Higgs couplings to quark pairs including QCD as well as some SUSY corrections (deltaMb) are implemented. Routines calculating (g-2), bsgamma and bsmumu are also included. In particular the bsgamma routine includes an improved NLO for the SM and the charged Higgs while the SUSY large tan(beta) effects beyond leading-order are included. This new version also provides cross-sections for any 2->2 process as well as partial decay widths for two-body final states in the MSSM allowing for easy simulation at colliders.

Gas detector are very light instrument used in high energy physics to measure the particle properties: position and momentum. Through high electric field is possible to use the Gas Electron Multiplier (GEM) technology to detect the charged particles and to exploit their properties to construct a large area detector, such as the new IT for BESIII. The state of the art in the GEM production allows to create very large area GEM foils (up to 50x100 $\mathrm{cm}^2$) and thanks to the small thickness of these foils is it possible to shape it to the desired form: a Cylindrical Gas Electron Multiplier (CGEM) is then proposed. The innovative construction technique based on Rohacell, a PMI foam, will give solidity to cathode and anode with a very low impact on material budget. The entire detector is sustained by Permaglass rings glued at the edges. These rings are used to assembly the CGEM, together with a dedicated Vertical Insertion System and moreover they host the On-Detector electronic. The anode has been improved w.r.t. the state of the art through a jagged readout that minimize the inter-strip capacitance. The mechanical challenge of this detector requires a precision of the entire geometry within few hundreds of microns in the whole area. In this contribution an overview of the construction technique, the validation of this technique through the realization of a CGEM, and its first tests will be presented. These activities are performed within the framework of the BESIIICGEM Project (645664), funded by the European Commission in the action H2020-RISE-MSCA-2014.

Silicon photomultipliers (SiPM) are the photon detectors chosen for the tracking readout in NEXT, a neutrinoless {\beta}{\beta} decay experiment which uses a high pressure gaseous xenon time projection chamber (TPC). The reconstruction of event track and topology in this gaseous detector is a key handle for background rejection. Among the commercially available sensors that can be used for tracking, SiPMs offer important advantages, mainly high gain, ruggedness, cost-effectiveness and radio-purity. Their main drawback, however, is their non sensitivity in the emission spectrum of the xenon scintillation (peak at 175 nm). This is overcome by coating these sensors with the organic wavelength shifter tetraphenyl butadienne (TPB). In this paper we describe the protocol developed for coating the SiPMs with TPB and the measurements performed for characterizing the coatings as well as the performance of the coated sensors in the UV-VUV range.

High-pressure xenon gas is an attractive detection medium for a variety of applications in fundamental and applied physics. In this paper we study the ionization and scintillation detection properties of xenon gas at 10 bar pressure. For this purpose, we use a source of alpha particles in the NEXT-DEMO time projection chamber, the large scale prototype of the NEXT-100 neutrinoless double beta decay experiment, in three different drift electric field configurations. We measure the ionization electron drift velocity and longitudinal diffusion, and compare our results to expectations based on available electron scattering cross sections on pure xenon. In addition, two types of measurements addressing the connection between the ionization and scintillation yields are performed. On the one hand we observe, for the first time in xenon gas, large event-by-event correlated fluctuations between the ionization and scintillation signals, similar to that already observed in liquid xenon. On the other hand, we study the field dependence of the average scintillation and ionization yields. Both types of measurements may shed light on the mechanism of electron-ion recombination in xenon gas for highly-ionizing particles. Finally, by comparing the response of alpha particles and electrons in NEXT-DEMO, we find no evidence for quenching of the primary scintillation light produced by alpha particles in the xenon gas.

NEXT-DEMO is a high-pressure xenon gas TPC which acts as a technological test-bed and demonstrator for the NEXT-100 neutrinoless double beta decay experiment. In its current configuration the apparatus fully implements the NEXT-100 design concept. This is an asymmetric TPC, with an energy plane made of photomultipliers and a tracking plane made of silicon photomultipliers (SiPM) coated with TPB. The detector in this new configuration has been used to reconstruct the characteristic signature of electrons in dense gas. Demonstrating the ability to identify the MIP and "blob" regions. Moreover, the SiPM tracking plane allows for the definition of a large fiducial region in which an excellent energy resolution of 1.82% FWHM at 511 keV has been measured (a value which extrapolates to 0.83% at the xenon Qbetabeta).

The upgrade of the ALICE TPC will allow the experiment to cope with the high interaction rates foreseen for the forthcoming Run 3 and Run 4 at the CERN LHC. In this article, we describe the design of new readout chambers and front-end electronics, which are driven by the goals of the experiment. Gas Electron Multiplier (GEM) detectors arranged in stacks containing four GEMs each, and continuous readout electronics based on the SAMPA chip, an ALICE development, are replacing the previous elements. The construction of these new elements, together with their associated quality control procedures, is explained in detail. Finally, the readout chamber and front-end electronics cards replacement, together with the commissioning of the detector prior to installation in the experimental cavern, are presented. After a nine-year period of R&D, construction, and assembly, the upgrade of the TPC was completed in 2020.

We summarise the results of a study performed within the GENIE global analysis framework, revisiting the GENIE bare-nucleon cross-section tuning and, in particular, the tuning of a) the inclusive cross-section, b) the cross-section of low-multiplicity inelastic channels (single-pion and double-pion production), and c) the relative contributions of resonance and non-resonance processes to these final states. The same analysis was performed with several different comprehensive cross-section model sets available in GENIE Generator v3. In this work we performed a careful investigation of the observed tensions between exclusive and inclusive data, and installed analysis improvements to handle systematics in historic data. All tuned model configurations discussed in this paper are available through public releases of the GENIE Generator. With this paper we aim to support the consumers of these physics tunes by providing comprehensive summaries of our alternate model constructions, of the relevant datasets and their systematics, and of our tuning procedure and results.